带运算放大器、数字变阻器、EEPROM和一系列模拟和数字宏单元的可配置模拟混合信号集成电路
The SLG47004 builds upon the flexibility of the GreenPAK’s traditional mixed-signal solution by integrating a mix of advanced analog features including Op Amps with programmable bandwidth, 10-bit digital rheostats, analog switches, and a chopper analog comparator. The unique Auto-Trim feature highlights the ability of this GreenPAK device to periodically tune its rheostat value to either compensate for system error sources or reconfigure circuit parameters. The SLG47004 provides dynamic power down control for all analog and digital blocks to optimize power consumption performance. Common applications include sensor interfaces, ADC analog front-ends, configurable amplifiers, tunable filters, and a variety of other analog circuits. This multi-time programmable solution is built into a tiny 3 mm x 3 mm package.
宏细胞概述
Two General Purpose Op Amps with Configurable Bandwidth
- 仪表放大器模式包括3研发内部运算放大器
Two 10-bit 100kΩ Digital Rheostats with Optional Potentiometer Mode
Two SPST Analog Switches
Three Analog Comparators
- Two Low Power General Purpose Rail-to-Rail Analog Comparators (ACMPxL)
- 一个低偏置斩波比较器
Three Oscillators (OSC):
- 2.048 kHz Oscillator;
- 2.048 MHz Oscillator;
- 25兆赫振荡器;
十三组合功能宏细胞
- 三个可选的DFF/锁存器或2位LUT
- One Selectable Programmable Pattern Generator or 2-bit LUT
- 七个可选的DFF/锁存器或3位LUT
- 一个可选择的管道延迟或纹波计数器或3位LUT
- 一个可选的DFF/锁存器或4位LUT
Seven Multi-Function Macrocells
- 六个可选的DFF/锁存器或3位LUT+8位延迟/计数器
- 一个可选的DFF/锁存器或4位LUT+ 16-bit Delay/Counter
我2C Serial Communication Interface
Analog Temperature Sensor
2千比特(256 x 8)I2带软件写保护的C兼容(2线)串行EEPROM仿真
上电复位(POR)
特征
两个独立模拟通道的用户定义自动微调程序
Event-triggered Memory Self-programming Routine for Digital Rheostats
我n System Programmability
Multiple Time Programmable Memory
Configurable Power Down Option for All Analog and Digital Macrocells
Wide Range Power Supply
2.5伏(±4%)至5 V(±10%)
低电流消耗
工作温度范围:-40°C至85°C级
符合RoHS/无卤素
雷竞技安卓下载
压力传感器接口
Photodetector Interfaces (Transimpedance Amplifiers, TIA)
力敏电阻传感器接口
PGA (Programmable Gain Amplifiers)
我nAmp (Instrumentation Amplifiers)
Sample & Hold Circuits
Portable and Handheld Electronics
家用电器和物联网
Robotics
其他消费和工业电子产品
Packages and Ordering
SLG47004型五: STQFN-24 (3.0 x 3.0 x 0.55 mm, 0.4 mm pitch)
产品标识后缀表示包装样式。
Stay connected
直接通过我们的全球销售办事处与我们联系,或联系我们的全球分销商和代表之一。
查询 Distributors and Representatives Register for newslettersAnalog GreenPAK™ Webinar
格林帕克Configurable Mixed-signal IC Introduction
GreenPAK设计师Software
格林帕克Development Platform
Choosing the Right GreenPAK
在我们的网站中查看GreenPAK视频的完整列表Training Video Library.
本产品提供一个包装:
SLG47004型五: STQFN-24 (3.0 x 3.0 x 0.55 mm, 0.4 mm pitch)
Development board selector
为GreenPAK设备提供完整的编程、仿真和测试功能。用于SLG46xxxX SKT插座套件。
Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:
- 在几分钟内编程定制示例
- Test GreenPAK projects in-circuit
- Develop using any GreenPAK device
- 编程
- 仿真
- Signal and Logic Generators
- USB interface
- MacOS, Windows and Linux compatible
- 编程and Emulation
- Gated expansion header for connection to external test equipment
- 我ntegrated signal and logic generators
- LEDs for visual indication
完美的实验板和快速原型。
与GreenPAK Designer软件协同工作,GreenPAK DIP开发板允许设计师:
- 在几分钟内编程定制示例
- Test GreenPAK projects in-circuit
- 编程
- 仿真
- USB interface
- MacOS, Windows and Linux compatible
- 编程and Emulation
- Gated expansion header for connection to external test equipment
Provides advanced emulation and testing functions for select GreenPAK devices.
GreenPAK Pro开发板与GreenPAK Designer软件协同工作,允许设计师:
- 在几分钟内编程定制示例
- Test GreenPAK projects in-circuit
- Develop using select GreenPAK device
- 编程
- 仿真
- Signal and Logic Generators
- 高速信号和逻辑发生器
- 逻辑分析仪**
- USB interface
- MacOS, Windows and Linux compatible
- 编程and Emulation
- Gated expansion header for connection to external test equipment
- 我ntegrated high speed signal and logic generators
**This feature is not available at the moment and will be added through the software update
格林帕克Advanced Development Board
- 编程
- 仿真
- Signal and Logic Generators
GreenPAK DIP开发委员会
完美的实验板和快速原型。
与GreenPAK Designer软件协同工作,GreenPAK DIP开发板允许设计师:
- 在几分钟内编程定制示例
- Test GreenPAK projects in-circuit
- 编程
- 仿真
GreenPAK Pro开发委员会
Provides advanced emulation and testing functions for select GreenPAK devices.
GreenPAK Pro开发板与GreenPAK Designer软件协同工作,允许设计师:
- 在几分钟内编程定制示例
- Test GreenPAK projects in-circuit
- Develop using select GreenPAK device
- 编程
- 仿真
- Signal and Logic Generators
- 高速信号和逻辑发生器
- 逻辑分析仪**
格林帕克Development Board for Serial Debugging and In-System Programmability.
- Can support serial debugging for all GreenPAK parts with I²C
- SLG46824、SLG46826和SLG47004的串行编程
- 五ery helpful in late stages of development when doing debug on-board is easiest
其他部件
格林帕克商标Programmable Mixed-signal Matrix with In System Programmability. 2 Op Amps (In Amp mode including internal Op Amp), 2 100k 10-bit digital rheostats, 8 GPIO, 3 ACMPs, 2 SPST analog switches, 20 LUTs (max.), 7 CNT/DLY (max.), 18 DFF/LATCH (max.), EEPROM, I2C, and other Macrocells. Package: STQFN-24.
格林帕克商标Programmable Mixed-signal Matrix with In System Programmability. 2 Op Amps (In Amp mode including internal Op Amp), 2 100k 10-bit digital rheostats, 8 GPIO, 3 ACMPs, 2 SPST analog switches, 20 LUTs (max.), 7 CNT/DLY (max.), 18 DFF/LATCH (max.), EEPROM, I2C, and other Macrocells. Package: STQFN-24.
我ncluded: SLG4SA24AA-30x30 socket adapter, 20 SLG47004V samples.
20针DIP原型板。完美的实验板和快速原型。
SLG47004评估委员会。设计用于原型基本模拟配置的SLG47004与用户定义的参数。
格林帕克Development Board for Serial Debugging and In-System Programmability.
- Can support serial debugging for all GreenPAK parts with I²C
- SLG46824、SLG46826和SLG47004的串行编程
- 五ery helpful in late stages of development when doing debug on-board is easiest
两周前
SLG47004型Op Amp Buffer
Posted by安迪肖特25分 1replyGreenPAK Designer第6.25版
SLG47004型
我使用OPAMP0作为模拟输入的非反相缓冲区。
如果我允许输入电压降到0V,那么OPAMP输出似乎会关闭,直到电压升高5或6mS后才会再次打开。这是8MHz B/W。B/W设置越低,响应时间越长。
我没有在实际的集成电路上测试过。
附件 | 大小 |
---|---|
设计印刷品 | 81.56 KB |
运算放大器输入降至0伏 | 85.26千字节 |
运算放大器输入保持在0V以上 | 83.07千字节 |
两周前
Hi,
Thank you for reaching out to us. Unfortunately this is a problem with the simulation model. Our simulation team is working on this and it will be fixed in the next GPAK designer SW revision which will be out by next month
Kind Regards
希瓦尼